Tutorial 9: Select files and run processes

Authors: Francois Tadel, Elizabeth Bock, Sylvain Baillet

The Brainstorm window includes a graphical batching interface. With the two tabs Process1 and Process2 in the lower part of the window, you can select files from the database explorer and assemble a processing pipeline. Most of the operations available in the interface can also be executed this way, including everything we've been doing with Brainstorm so far.

On the other hand, some features are only available this way. It is the case for the frequency filters we will need for the pre-processing of our auditory recordings. This tutorial is a parenthesis to explain how to select files and run processes, we will resume with the cleaning of the recordings in the next tutorial.

Selecting files to process

The tab Process1 contains a empty box in which you can drag and drop any number of files or folders from the database explorer. The easiest way to understand how it works is to try it.

• Try to drag and drop, in Process1, all the nodes you currently have in your database explorer.
• You will see that it accepts all the folders and all the recordings, but not the channel files.
• When you add a new node, the interface evaluates the number of files of the selected type that each of them contain. The number in the brackets next to each node represents the number of data files that were found in them.

• On top of the list, a comment shows the total number of files that are currently selected.
  
  

• The buttons on the left side allow you to select what type of file you want to process: Recordings, sources, time-frequency, other. When you select another button, all the counts are updated to reflect the number of files of the selected type that are found for each node.

• Right now, if you select another file type, it would show only "0" everywhere because there are no sources or time-frequency decompositions available in the database yet.
  
  

• To remove files from the Process1 list:

  • Select the nodes to remove (holding Shift or Ctrl key) and press the Delete key.

  • Right-click on the list > Clear list

Filter by name

When you have lots of files in a folder, like multiple source reconstructions or time-frequency files for each trial, it is difficult to grab just the ones you are interested in. After selecting your folders in the Process1 box, you can refine the selection with the Filter search box at the bottom-right corner of the window.

• The example below shows how to select the data files corresponding to the noise recordings: by typing "Noise" in the search box and selecting the option "Search file paths". We cannot perform the search "by name" because all the data files have the same name "Link to raw file".
  
  

• Reminder: To see the file name corresponding to a node in the database, leave your mouse over it for a few seconds. You can do this both in the database explorer and the Process1 list.
  
  

The options offered in the Filter menu are:

• Search file paths: Look for the string in the full file paths (including their relative path).

• Search names: Look for the string in the names of the files, ie. what is displayed in the database explorer to represent them (the .Comment field).

• Search parent names: Extends the search to the name of the parent files (applicable only to source and time-frequency files, which can depend on a data file).

• Select files: Only the files that contain the string are selected.

• Exclude files: Only the files that DO NOT contain the string are selected.

• Reset filters: Removes the current file filters applied on Process1 and Process2.

• Case insensitive: Note that the search is not sensitive to case.

• Boolean logic: You can combine different keywords to make a more precise search using advanced search queries. See the following section for more information.

Advanced search queries (WIP)

For advanced users, you can write more complex search queries that can combine multiple keywords and types of keywords using boolean logic. You can do this using the Brainstorm search GUI and then copy your search as text to re-use later. These queries work for both database searches and process filters. The syntax is rigid such that the order of the commands is important, so we recommend you use the search GUI whenever possible to avoid errors. Search queries can contain the following types of elements:

• Search parameters: These are simple searches that are on a specific type of value. They need to be written in [square brackets]. They look like the following:

  • [searchFor EQUALITY NOT "value"]

  • SearchFor: Which field of the files metadata to search for It can have the following values, in lower case:

    • Name: Searches using the file name in Brainstorm
    • Type: Searches using the file type in Brainstorm
    • Path: Searches using the file path in the Brainstorm database folder
    • Parent: Searches using the parents name in the Brainstorm database tree

  • Equality: The type of equality you want to use to compare the file value to the searched value. It can have the following values, in upper case:

    • CONTAINS: Whether the searchFor field contains the text "value"
    • CONTAINS_CASE: Same as CONTAINS, but case sensitive
    • EQUALS: Whether the searchFor field exactly equals the text "value"
    • EQUALS_CASE: Same as EQUALS, but case sensitive

  • NOT: (optional) add this reserved keyword to return the opposite results of the search, so for example, all files that do NOT CONTAIN the text "value".

  • "value": the text you want to search for, in double quotes.

• Boolean operators: These are used to group together search parameters and search blocks using boolean logic. Considering search parameters a, b and c, the following will return files that pass searches a and a, or does not pass search c:

  • (a AND b) OR NOT c

  • AND: This combines search parameters and blocks such that both conditions have to be met.

  • OR: This combines search parameters and blocks such that either conditions have to be met

  • NOT: This precedes a search block or parameter such that the condition result is reversed. So if a condition had to be met, it now has to not be met.

  • Important note: AND and OR operators cannot be mixed together (you cannot have both in the same search block), because otherwise it creates uncertainties.

• Search blocks: These are combinations of search parameters and boolean operators, wrapped in (round brackets). You cannot have different boolean operators in the same block

Example

(([name CONTAINS "test1"] AND [type EQUALS "Matrix"]) OR NOT [parent CONTAINS "test2"])

Effect: This will match all matrix files containing text "test1" or all files whose parent docontains the text "test2".

Limitations of the GUI

The GUI does not support multiple nested search blocks. It only allows for one OR block followed by one AND block. If your query is more advanced than this, you will not be able to edit it with the search GUI. We recommend you use the process filter box instead.

Selecting processes

• Clear the file list and the search filters.

• Select all three datasets we have linked to our protocol.
  You can select the three "link to raw file" nodes, the three folders or the entire subject node.

• Click on the [Run] button at the bottom-left corner of the Process1 tab.

• The Pipeline editor window appears. You can use it to create an analysis pipeline, i.e., a list of processes that are applied to the selected files one after the other. The first button in the toolbar shows the list of processes that are currently available. If you click on a menu, it's added to the list.

• Some menus appear in grey. This means that they are not designed to be applied to the type of data that you have in input, or at the end of the current pipeline.

• In the current example, we have a file with the type "continuous raw recordings", so we have access mostly to menus to manipulate event markers, run cleaning procedures and import data blocks. You can recognize a few operations that we executed in the previous tutorials: "Event > Read from channel" and "Event > Detect analog triggers".
  
  

• When you select a process, a list of options specific to this process is shown in the window.

• To delete a process: Select it and press the Delete key, or use the [X] button in the toolbar.

• After selecting a first process, you can add another one. The output of the first process will be passed to the second process without giving back the control to the user. This is how you can build a full analysis pipeline with the interface.
• After adding a few processes, you can move a process up or down in the pipeline with the [up arrow] and [down arrow] buttons in the toolbar. Click on a process in the pipeline to edit its options.
• Select and delete a few processes to understand how this interface works. Just do not click on RUN.

Plugin structure

All the menus available in the pipeline editor are actually plugins for Brainstorm. The processes are functions that are independent from each other and automatically detected when starting Brainstorm.

Any Matlab script that is added to the plugin folder (brainstorm3/toolbox/process/functions/) and has the right format will automatically be detected and made available in the GUI. This mechanism makes it easy for external contributors to develop their own code and integrate it in the interface.

More information: How to write your own process

To see where the function corresponding to a process is on the hard drive: select the process in the pipeline editor, then leave your mouse for a few seconds over its title.

Note for beginners

Everything below is advanced documentation, you can skip it for now.

Saving a pipeline

After preparing your analysis pipeline by listing all the operations to run on your input files, you can either click on the [Run] button, or save/export your pipeline. The last button in the the toolbar offers a list of menus to save, load and export the pipelines.

• 

• Load: List of pipelines that are saved in the user preferences on this computer.

• Load from .mat file: Import a pipeline from a pipeline_...mat file.

• Save: Save the pipeline in the user preferences.

• Save as .mat matrix: Exports the pipeline as Matlab structure in a .mat file. Allows different users to exchange their analysis pipelines, or a single user between different computers.

• Generate .m script: This option generates a Matlab script.

• Delete: Remove a pipeline that is saved in the user preferences.

• Reset options: Brainstorm automatically saves the options of all the processes in the user preferences. This menu removes all the saved options and sets them back to the default values.

Automatic script generation

Here is the Matlab script that is generated for this pipeline.

Reading this script is easy: input files at the top, one block per process, one line per option. You can also modify them to add personal code, loops or tests. Many features are still missing in the pipeline editor, but the generated scripts are easy enough for users with basic Matlab knowledge to edit and improve them.

Running this script from Matlab or clicking on the [Run] button of the pipeline editor produce exactly the same results. In both cases you will not have any interaction with the script, it could be executed without any direct supervision. You just get a report in the end that describes everything that happened during the execution.

These scripts cannot be reloaded in the pipeline editor window after being generated. If you work on a long analysis pipeline, save it in your user preferences before generating the corresponding Matlab script.

Process: Select files with tag

Since we are discussing the file selection and the pipeline execution, we can explore a few more available options. We have seen how to filter the files in the Process1 box using the Filter search box. We can get to the exact same result by using the process File > Select files: By tag before the process you want to execute, to keep only a subset of the files that were placed in the Process1 list.

It is less convenient in interactive mode because you don't immediately see the effect of your file filter, but it can be very useful when writing scripts. You can also combine search constraints by adding the same process multiple times in your pipeline, which is not possible with the search box.

• Make sure you still have the three datasets selected in the Process1 list.

• Select the process: File > Select files: By tag

• Select the options: Search: "Noise", Search the file names, Select only the files with the tag.

• Click on [Run] to execute the process.
  
  

• This process is useless if not followed immediately by another process that does something with the selected files. It does nothing but selecting the file, but we can observe that the operation was actually executed with the report viewer.

Report viewer

Everytime the pipeline editor is used to run a list of processes, a report is created and logs all the messages that are generated during the execution. These reports are saved in the user home folder: $HOME/.brainstorm/reports/.

The report viewer shows, as an HTML page, some of the information saved in this report structure: the date and duration of execution, the list of processes, and the input and output files. It reports all the warnings and errors that occurred during the execution.

The report is displayed at the end of the execution only if there were more than one process executed, or if an error or a warning was reported. In this case, nothing is displayed.

You can always explicitly open the report viewer to show the last reports: File > Report viewer.

When running processes manually from a script, the calls to bst_report explicitly indicate when the logging of the events should start and stop.

You can add images to the reports for quality control using the process File > Save snapshot.

With the buttons in the toolbar, you can go back to the previous reports saved from the same protocol.

More information: Complete tutorial script

Error management

• Select the same files and same process: File > Select files: By tag

• Note that the options you used during the previous call are now selected by default.

• Instead of "Noise", now search for a string that doesn't exist in the file name, such as "XXXX".
  
  

• Click on [Run] to execute the process. You will get the following error.
  
  

• If you open the report viewer, it should look like this.
  
  

Control the output file names

If you are running two processes with different parameters but that produce exactly the same file paths and file names, you wouldn't be able to select them with this process. But immediately after calling any process, you can add the process File > Add tag to tag one specific set of files, so that you can easily re-select them later.

Example: You run the time-frequency decomposition twice with different options on the same files, tag the files after calculating them with different tags.

Additional documentation

• Tutorial: Scripting

• Tutorial: How to write your own process