MEG visual tutorial: Single subject (BIDS)

[WORK IN PROGRESS: THIS TUTORIAL IS NOT READY FOR PUBLIC USE]

Authors: Francois Tadel, Elizabeth Bock.

The aim of this tutorial is to reproduce in the Brainstorm environment the analysis described in the SPM tutorial "Multimodal, Multisubject data fusion". We use here a recent update of this dataset, reformatted to follow the Brain Imaging Data Structure (BIDS), a standard for neuroimaging data organization. It is part of a collective effort to document and standardize MEG/EEG group analysis, see Frontier's research topic: From raw MEG/EEG to publication: how to perform MEG/EEG group analysis with free academic software.

The data processed here consists of simultaneous MEG/EEG recordings from 16 participants performing a simple visual recognition task from presentations of famous, unfamiliar and scrambled faces. The analysis is split in two tutorial pages: the present tutorial describes the detailed interactive analysis of one single subject; the second tutorial describes batch processing and group analysis of all 16 participants.

Note that the operations used here are not detailed, the goal of this tutorial is not to introduce Brainstorm to new users. For in-depth explanations of the interface and theoretical foundations, please refer to the introduction tutorials.

License

This dataset was obtained from the OpenfMRI project (http://www.openfmri.org), accession #ds117. It is made available under the Creative Commons Attribution 4.0 International Public License. Please cite the following reference if you use these data:
Wakeman DG, Henson RN, A multi-subject, multi-modal human neuroimaging dataset, Scientific Data (2015)

Any questions regarding the data, please contact: rik.henson@mrc-cbu.cam.ac.uk

Presentation of the experiment

Experiment

• 16 subjects (the original version of the dataset included 19 subjects, but 3 were excluded from the group analysis for various reasons)

• 6 acquisition runs of approximately 10mins for each subject
• Presentation of series of images: familiar faces, unfamiliar faces, phase-scrambled faces
• Participants had to judge the left-right symmetry of each stimulus
• Total of nearly 300 trials for each of the 3 conditions

MEG acquisition

• Acquisition at 1100Hz with an Elekta-Neuromag VectorView system (simultaneous MEG+EEG).

• Recorded channels (404):
  • 102 magnetometers
  • 204 planar gradiometers
  • 70 EEG electrodes recorded with a nose reference.
• A Polhemus device was used to digitize three fiducial points and a large number of other points across the scalp, which can be used to coregister the M/EEG data with the structural MRI image.
• Stimulation triggers: The triggers related with the visual presentation are saved in the STI101 channel, with the following event codes (bit 3 = face, bit 4 = unfamiliar, bit 5 = scrambled):
  • Famous faces: 5 (00101), 6 (00110), 7 (00111)
  • Unfamiliar faces: 13 (01101), 14 (01110), 15 (01111)
  • Scrambled images: 17 (10001), 18 (10010), 19 (10011)

  • Delays between the trigger in STI101 and the actual presentation of stimulus: 34.5ms

• MaxFilter/tSSS: The data repository includes both the raw MEG recordings and the data cleaned using Signal-Space Separation as implemented in Elekta MaxFilter 2.2. The data was collected with continuous head localization and cannot be processed easily without running the algorithms SSS or tSSS. Brainstorm currently does not offer any free alternative to MaxFilter, therefore in this tutorial we will import the recordings already processed with MaxFilter's tSSS, available in the "derivatives" folder of the BIDS architecture. To save disk space, will not download the raw MEG recordings. This means we will not get any of the additional files available in the BIDS structure (headshape, events, channels) but it doesn't matter because all the information is directly available in the .fif files.

• The data distribution includes MEG noise recordings acquired around the dates of the experiment, processed with MaxFilter 2.2 in the same way as the experimental data.

Subject anatomy

• MRI data acquired on a 3T Siemens TIM Trio: 1x1x1mm T1-weighted structural MRI.
• The face was removed from the structural images for anonymization purposes.

• Processed with FreeSurfer 5.3.

Download and installation [TODO]

• First, make sure you have enough space on your hard drive, at least 350Gb:

  • Raw files: 100Gb

  • Processed files: 250Gb

• The data is hosted on the OpenfMRI website: https://openfmri.org/dataset/ds000117/

• Download the following files for revision 1.0.0 (approximately 70Gb):

  • Derivatives for subjects 01-04 (16.6 GB)

  • Derivatives for subjects 05-08 (16.1 GB)

  • Derivatives for subjects 09-12 (16.6 GB)

  • Derivatives for subjects 13-16 (16.5 GB)

  • Metadata (235.4 KB)

  • FreeSurfer segmentation: NOT AVAILABLE YET [TODO]

  • Derivatives for empty room recordings: NOT AVAILABLE YET [TODO]

• Unzip all the .zip files in the same folder.
  Reminder: Do not save the downloaded files in the Brainstorm folders (program or database folders)

• Start Brainstorm (Matlab scripts or stand-alone version). For help, see the Installation page.

• Select the menu File > Create new protocol. Name it "TutorialVisual" and select the options:

  • "No, use individual anatomy",

  • "No, use one channel file per condition".

Import the anatomy

This dataset is formatted following the BIDS-MEG specifications, therefore we could import all the relevant information (MRI, FreeSurfer segmentation, MEG+EEG recordings) in just one click, with the menu File > Load protocol > Import BIDS dataset, as described in the online tutorial MEG resting state & OMEGA database. However, because your own data might not be organized following the BIDS standards, in this tutorial we preferred illustrating all the detailed steps for importing the data rather than the BIDS shortcut.

This page explains how to import and process the first run of subject #01 only. All the other files will have to be processed in the same way.

• Switch to the "anatomy" view.

• Right-click on the TutorialVisual folder > New subject > sub-01

  • Leave the default options you defined for the protocol.

• Right-click on the subject node > Import anatomy folder:

  • Set the file format: "FreeSurfer folder"

  • Select the folder: derivatives/freesurfer/sub-01

  • Number of vertices of the cortex surface: 15000 (default value)

  • When asked to select the anatomical fiducials, click on "Compute MNI transformation". This will register the MRI volume to an MNI template with an affine transformation, using SPM functions embedded in Brainstorm (spm_maff8.m). This will also place default fiducial points NAS/LPA/RPA in the MRI, based on MNI coordinates. We will use head points for the MEG-MRI coregistration, therefore we don't need accurate anatomical positions here.

  • Note that if you don't have a good digitized head shape for the subject, or if the final registration MEG-MRI doesn't look good with this head shape, you should not skip this step and mark accurate NAS/LPA/RPA fiducial points in the MRI, using the same anatomical convention that was used during the MRI acquisition.
  • Then click on [Save] to start the import.

• At the end of the process, make sure that the file "cortex_15000V" is selected (downsampled pial surface, that will be used for the source estimation). If it is not, double-click on it to select it as the default cortex surface. Do not worry about the big holes in the head surface, parts of MRI have been remove voluntarily for anonymization purposes.
  
  

• All the anatomical atlases generated by FreeSurfer were automatically imported: the cortical atlases (Desikan-Killiany, Mindboggle, Destrieux, Brodmann) and the sub-cortical regions (ASEG atlas).
  
  

Access the recordings

Link the recordings

We need to attach the continuous .fif files containing the recordings to the database.

• Switch to the "functional data" view.

• Right-click on the subject folder > Review raw file.

  • Select the file format: "MEG/EEG: Neuromag FIFF (*.fif)"

  • Go to the folder: derivatives/meg-derivatives/sub-01/ses-meg/meg

  • Select file: sub-01_ses-meg_task-facerecognition_run-01_proc-tsss_meg.fif
    
    

• Events: Ignore. We will read the stimulus triggers later.
  
  

• Refine registration now? NO
  The head points that are available in the FIF files contain all the points that were digitized during the MEG acquisition, including the ones corresponding to the parts of the face that have been removed from the MRI. If we run the fitting algorithm, all the points around the nose will not match any close points on the head surface, leading to a wrong result. We will first remove the face points and then run the registration manually.

Channel classification

A few non-EEG channels are mixed in with the EEG channels, we need to change this before applying any operation on the EEG channels.

• Right-click on the channel file > Edit channel file. Double-click on a cell to edit it.

• Change the type of EEG062 to EOG (electrooculogram).

• Change the type of EEG063 to ECG (electrocardiogram).

• Change the type of EEG061 and EEG064 to NOSIG (or any other non-informative type). Close the window and save the modifications.
  
  

MRI registration

At this point, the registration MEG/MRI is based only on the three anatomical landmarks NAS/LPA/RPA, which are not even accurately set (we used default MNI positions). All the MRI scans were anonymized (defaced) so all the head points below the nasion cannot be used. We will try to refine this registration using the additional head points that were digitized above the nasion.

• Right-click on the channel file > Digitized head points > Remove points below nasion.
  (45 points removed, 92 head points left)
  
  

• Right-click on the channel file > MRI registration > Refine using head points.
  
  

• MEG/MRI registration, before (left) and after (right) this automatic registration procedure:
  
  

• Right-click on the channel file > MRI registration > EEG: Edit.
  Click on [Project electrodes on surface], then close the figure to save the modifications.
  
  

Read stimulus triggers

We need to read the stimulus markers from the STI channels. The following tasks can be done in an interactive way with menus in the Record tab, as in the introduction tutorials. We will illustrate here how to do this with the pipeline editor, it will be easier to batch it for all the runs and all the subjects.

• In Process1, select the "Link to raw file", click on [Run].

• Select process Events > Read from channel, Channel: STI101, Detection mode: Bit.
  Do not execute the process, we will add other processes to classify the markers.
  
  

• We want to create three categories of events, based on their numerical codes:

  • Famous faces: 5 (00101), 6 (00110), 7 (00111) => Bit 3 only

  • Unfamiliar faces: 13 (01101), 14 (01110), 15 (01111) => Bit 3 and 4

  • Scrambled images: 17 (10001), 18 (10010), 19 (10011) => Bit 5 only

  • We will start by creating the category "Unfamiliar" (combination of events "3" and "4") and remove the remove the initial events. Then we just have to rename the remaining "3" in "Famous", and all the "5" in "Scrambled".

• Add process Events > Group by name: "Unfamiliar=3,4", Delay=0, Delete original events

• Add process Events > Rename event: 3 => Famous

• Add process Events > Rename event: 5 => Scrambled
  
  

• Add process Events > Add time offset to correct for the presentation delays:
  Event names: "Famous, Unfamiliar, Scrambled", Time offset = 34.5ms
  
  

• Finally run the script. Double-click on the recordings to make sure the labels were detected correctly. You can delete the unwanted events that are left in the recordings (1,2,9,13). Edit the colors if you don't like the default ones.
  
  

Pre-processing

Spectral evaluation

• Keep the "Link to raw file" in Process1.

• Run process Frequency > Power spectrum density (Welch) with the options illustrated below.
  
  

• Right-click on the PSD file > Power spectrum.
  
  

• The MEG sensors look awful, because of one small segment of data located around 248s. Open the MEG recordings and scroll to 248s (just before the first Unfamiliar event).
  
  

• In these recordings, the continuous head tracking was activated, but it starts only at the time of the stimulation (248s) while the acquisition of the data starts 20s before (226s). The first 20s do not have head localization coils (HPI) coils activity and are not corrected by MaxFilter. After 248s, the HPI coils are on, and MaxFilter filters them out. The transition between the two states is not smooth and creates important distortions in the spectral domain. For a proper evaluation of the recordings, we should compute the PSD only after the HPI coils are turned on.

• Run process Events > Detect cHPI activity (Elekta). This detects the changes in the cHPI activity from channel STI201 and marks all the data without head localization as bad.
  
  

• Re-run the process Frequency > Power spectrum density (Welch). All the bad segments are excluded from the computation, therefore the PSD is now estimated only with the data after 248s.
  
  

• Observations:
  • Three groups of sensors, from top to bottom: EEG, MEG gradiometers, MEG magnetometers.

  • Power lines: 50 Hz and harmonics

  • Alpha peak around 10 Hz

  • Artifacts due to Elekta electronics (HPI coils): 293Hz, 307Hz, 314Hz, 321Hz, 328Hz.

  • Peak from unknown source at 103.4Hz in the MEG only.

  • Suspected bad EEG channels: EEG016

• Close all the windows.

Remove line noise

• Keep the "Link to raw file" in Process1.

• Select process Pre-process > Notch filter to remove the line noise (50-200Hz).
  Add the process Frequency > Power spectrum density (Welch).
  
  

• Double-click on the PSD for the new continuous file to evaluate the quality of the correction.
  
  

• Close all the windows (use the [X] button at the top-right corner of the Brainstorm window).

EEG reference and bad channels

• Right-click on link to the processed file ("Raw | notch(50Hz ...") > EEG > Display time series.

• Select channel EEG016 and mark it as bad (using the popup menu or pressing the Delete key).
  
  

• In the Record tab, menu Artifacts > Re-reference EEG > "AVERAGE".
  
  

• At the end, the window "select active projectors" is open to show the new re-referencing projector. Just close this window. To get it back, use the menu Artifacts > Select active projectors.

Artifact detection

Heartbeats: Detection

• Empty the Process1 list (right-click > Clear list).

• Drag and drop the continuous processed file ("Raw | notch(50Hz...)") to the Process1 list.

• Run process Events > Detect heartbeats: Channel name=EEG063, All file, Event name=cardiac
  
  

Eye blinks: Detection

• In many of the other tutorials, we detect the blinks and remove them with SSP. In this experiment, we are particularly interested in the subject's response to seeing the stimulus. Therefore we will exclude from the analysis all the recordings contaminated with blinks or other eye movements.

• Run process Events > Detect events above threshold:
  Event name=blink_BAD, Channel=EEG062, All file, Maximum threshold=100, Threshold units=uV, Filter=[0.30,20.00]Hz, Use absolute value of signal.
  
  

• In other tutorials, we used the process "Detect eye blinks" which creates simple events indicating the peak of the EOG signal during a blink. In this study, we preferred using this process "Detect events above threshold" because it creates extended events marking as bad all the segment for which the EOG value is above a given threshold. It's more manual but it ensures we really exclude all the ocular activity.

• Inspect visually the two new cateogries of events: cardiac and blink_BAD.
  
  

• Close all the windows (using the [X] button).

Heartbeats: Correction with SSP

• Keep the "Raw | notch" file selected in Process1.

• Select process Artifacts > SSP: Heartbeats > Sensor type: MEG MAG

• Add process Artifacts > SSP: Heartbeats > Sensor type: MEG GRAD - Run the execution
  
  

• Double-click on the continuous file to show all the MEG sensors.
  In the Record tab, select sensors "Left-temporal".

• Menu Artifacts > Select active projectors.

  • In category cardiac/MEG MAG: Select component #1 and view topography.

  • In category cardiac/MEG GRAD: Select component #1 and view topography.
    
    

• Make sure that selecting the two components removes the cardiac artifact. Then click [Save].

Additional bad segments

• Process1>Run: Select the process "Events > Detect other artifacts". This should be done separately for MEG and EEG to avoid confusion about which sensors are involved in the artifact.
  
  

• Display the MEG sensors. Review the segments that were tagged as artifact, determine if each event represents an artifact and then mark the time of the artifact as BAD. This can be done by selecting the time window around the artifact, then right-click > Reject time segment. Note that this detection process marks 1-second segments but the artifact can be shorter.
  
  

• Once all the events in the two categories are reviewed and bad segments are marked, the two categories (1-7Hz and 40-240Hz) can be deleted.
• Do this detection and review again for the EEG.

SQUID jumps

MEG signals recorded with Elekta-Neuromag systems frequently contain SQUID jumps (more information). These sharp steps followed by a change of baseline value are easy to identify visually but more complicated to detect automatically.

The process "Detect other artifacts" usually detects most of them in the category "1-7Hz". If you observe that some are skipped, you can try re-running it with a higher sensitivity. It is important to review all the sensors and all the time in each run to be sure these events are marked as bad segments.

Epoching and averaging

Import epochs

• Keep the "Raw | notch" file selected in Process1.

• Select process: Import recordings > Import MEG/EEG: Events (do not run immediately)
  Event names "Famous, Unfamiliar, Scrambled", All file, Epoch time=[-500,1200]ms

• Add process: Pre-process > Remove DC offset: Baseline=[-500,-0.9]ms - Run execution.
  
  

Average by run

• In Process1, select all the imported trials.

• Run process: Average > Average files: By trial groups (folder average)
  
  

Review EEG ERP

• EEG evoked response (famous, scrambled, unfamiliar), low-pass filter at 32Hz:
  
  

• Open the Cluster tab and create a cluster with the channel EEG065 (button [NEW IND]).
  
  

• Select the cluster, select the three average files, right-click > Clusters time series (Overlay:Files).
  
  

• Basic observations for EEG065 (right parieto-occipital electrode):
  • Around 170ms (N170): greater negative deflection for Famous than Scrambled faces.
  • After 250ms: difference between Famous and Unfamiliar faces.

Source estimation [TODO]

MEG noise covariance: Empty room recordings [TODO]

The minimum norm model we will use next to estimate the source activity can be improved by modeling the the noise contaminating the data. The introduction tutorials explain how to estimate the noise covariance in different ways for EEG and MEG. For the MEG recordings we will use the empty room measurements we have, and for the EEG we will compute it from the pre-stimulus baselines we have in all the imported epochs.

There are 8 empty room files available in this dataset. For each subject, we will use only one file, the one that was acquired at the closest date. We will now import and process all the empty room recordings simultaneously, even if only one is needed by the current subject. Later, for each subject we will select the most appropriate noise covariance matrix.

• Create a new subject: sub-emptyroom

• Right-click on the new subject > Review raw file.
  Select all the folders in: derivatives/sub-emptyroom (processed with MaxFilter/tSSS)
  Do not apply default transformation, Ignore event channel.
  
  

• Select all these new files in Process1 and run process Pre-process > Notch filter: 50 100 150 200Hz. When using empty room measurements to compute the noise covariance, they must be processed exactly in the same way as the other recordings (same MaxFilter parameters, same frequency filters).
  
  

• Delete all the original noise files and keep only the filtered ones.

• Identify the noise file that was recorded the closest to the subject's recordings. You can read the acquisition date of a file in the tooptip that is displayed when you leave you mouse for a while over its folder. The MEG for subject sub-01 was recorded on April 9th 2009, so we will compute the MEG noise covariance for this subject from the first noise file available, which was acquired on the same date.
  
  

• Right-click on the noise recordings 2009-04-09 > Noise covariance > Compute from recordings:
  
  

• Finally copy the noise covariance from sub-emptyroom to the folder with imported epochs in sub-01. Use the popup menus File>Copy/Paste, or the keyboard shortcuts Ctrl+C/Ctrl+V.
  
  

EEG noise covariance: Pre-stimulus baseline

• In folder sub-01/run-01_tsss_notch, select all the imported the imported trials, right-click > Noise covariance > Compute from recordings, Time=[-500,-0.9]ms, EEG only, Merge.

• This computes the noise covariance only for EEG, and combines it with the existing MEG information.

• To generate the corresponding analysis script, we will use a different strategy, which will match automatically the subject with the appropriate MEG noise covariance. We will first import all the subjects, compute the EEG noise covariance for all the runs, then compute the MEG noise covariance matrix for all the empty room files at once with the process "Sources > Compute covariance" with the options "Match noise and subject recordings by acquisition date", "Sensor types=MEG", "Merge".
  
  

BEM layers

We will compute a BEM forward model to estimate the brain sources from the EEG recordings. For this, we need some layers defining the separation between the different tissues of the head (scalp, inner skull, outer skull).

• Go to the anatomy view (first button above the database explorer).

• Right-click on the subject folder > Generate BEM surfaces: The number of vertices to use for each layer depends on your computing power and the accuracy you expect. You can try for instance with 1082 vertices (scalp) and 642 vertices (outer skull and inner skull).
  
  

Forward model: EEG and MEG

• Go back to the functional view (second button above the database explorer).

• Model used: Overlapping spheres for MEG, OpenMEEG BEM for EEG (more information).

• In folder sub-01/run_01_tsss_notch, right-click on the channel file > Compute head model.
  Keep all the default options . Expect this to take a while...
  
  

Inverse model: Minimum norm estimates

• Right-click on the new head model > Compute sources [2016]: MEG MAG + GRAD (default options)
  
  

• Right-click on the new head model > Compute sources [2016]: EEG (default bad channels).

• At the end we have two inverse operators, that are shared for all the files of the run (single trials and averages). If we wanted to look at the run-level source averages, we could normalize the source maps with a Z-score wrt baseline. In this tutorial, we will first average across runs and normalize the subject-level averages. This will be done in the next tutorial (group analysis).
  
  

Time-frequency analysis

We will compute the time-frequency decomposition of each trial using Morlet wavelets, and average the power of the Morlet coefficients for each condition and each run separately. We will restrict the computation to the MEG magnetometers and the EEG channels to limit the computation time and disk usage.

• In Process1, select the imported trials "Famous" for run#01.

• Run process Frequency > Time-frequency (Morlet wavelets): Sensor types=MEG MAG,EEG
  Not normalized, Frequency=Log(6:20:60), Measure=Power, Save average
  
  

• Double-click on the file to display it. In the Display tab, select the option "Hide edge effects" to exclude from the display all the values that could not be estimated in a reliable way. Let's extract only the good values from this file (-200ms to +900ms).
  
  

• In Process1, select the time-frequency file.

• Run process Extract > Extract time: Time window=[-200, 900]ms, Overwrite input files
  
  

• Display the file again, observe that all the possibly bad values are gone.
  
  

• You can display all the sensors at once (MEG MAG or EEG): right-click > 2D Layout (maps).
  
  

• Repeat these steps for other conditions (Scrambled and Unfamiliar) and the other runs (2-6). There is no way with this process to compute all the averages at once, as it is with the process "Average files". This will be easier to run from a script.
• If we wanted to look at the run-level source averages, we could normalize these time-frequency maps. In this tutorial, we will first average across runs and normalize the subject-level averages. This will be done in the next tutorial (group analysis).

Scripting

We have now all the files we need for the group analysis (next tutorial). We need to repeat the same operations for all the runs and all the subjects. Some of these steps are fully automatic and take a lot of time (filtering, computing the forward model), they should be executed from a script.

However, we recommend you always review manually some of the pre-processing steps (selection of the bad segments and bad channels, SSP/ICA components). Do not trust blindly any fully automated cleaning procedure.

For the strict reproducibility of this analysis, we provide a script that processes all the 19 subjects: brainstorm3/toolbox/script/tutorial_visual_full_single.m (execution time: 10-30 hours)
Report for the first subject: report_TutorialVisual_sub-01.html

You should note that this is not the result of a fully automated procedure. The bad channels were identified manually and are defined for each run in the script. The bad segments were detected automatically, confirmed manually for each run and saved in external files, then exported as text ans copied at the end of this script.

All the process calls (bst_process) were generated automatically using with the script generator (menu Generate .m script in the pipeline editor). Everything else was added manually (loops, bad channels, file copies).